#
#
#
#
#
#
#

So!Gnee

Smart Multi-Channel
Communication Module

So!Gnee

Smart Multi-Channel
Communication Module

#

Multi-Channel Communication Module

• Connect 8 vibration/temperature modules

• 16 analog input channels

• Supports various communication methods

• User can choose communication method

• Voltage and current type sensors available

• PLC and HMI (SCADA) communication

• SSID, PASSWORD, IP , MAC Address Set via Monitor

#
#

Multi-Channel Communication Module

#

• Connect 8 vibration/temperature modules

• 16 analog input channels

• Supports various communication methods

• User can choose communication method

• Voltage and current type sensors available

• PLC and HMI (SCADA) communication

• SSID, PASSWORD, IP , MAC Address Set via Monitor

#

Specification

#

System configuration diagram using multi-channel communication module

#

Description of each port

1. Power : 24V input
2. Reset : Reset processing after setting up MODE and Monitor
3. Monitor : Setup settings, IP and Mac address settings,
    communication output status monitoring
4. Switch : Entering the setting mode from the monitor state
is done through the ‘q’ or “Switch” button.
5. MODE 1,2,3 : see MODE
6. Modbus RTU : Modbus RTU communication port 19600
    (based on RS485 communication)
7. Ethernet : Ethernet communication port
8. ANT : Antenna for WiFi
9. AINC1 ~ AINC4 , 4 ~ 20mA Current input (vibration, temperature)
10. AINV1 ~ AINV4 , 0 ~ 5V Voltage input (vibration, temperature)

#
#
#

Description of each port

#

1. Power : 24V input
2. Reset : Reset processing after setting up MODE and Monitor
3. Monitor : Setup settings, IP and Mac address settings,
    communication output status monitoring
4. Switch : Entering the setting mode from the monitor state
is done through the ‘q’ or “Switch” button.
5. MODE 1,2,3 : see MODE
6. Modbus RTU : Modbus RTU communication port 19600
    (based on RS485 communication)
7. Ethernet : Ethernet communication port
8. ANT : Antenna for WiFi
9. AINC1 ~ AINC4 , 4 ~ 20mA Current input (vibration, temperature)
10. AINV1 ~ AINV4 , 0 ~ 5V Voltage input (vibration, temperature)

#
#
#
#